wadmin

Audio Interfaces

by

VO Tips for the Non-VO Pro: Audio Interfaces

Welcome back to VO Tips for the Non-VO Pro where I’ll discuss audio interfaces.

Anyway, I’m a big believer in logical progressions when it comes to learning. Don’t head straight for the end boss when you’re a level 1 paladin, assign a 20 page historical essay in the first week of the semester, or offer performance tips before your recording setup is figured out. So, today we’re gonna talk about audio interfaces and next time we’ll cover your recording software.

What are audio interfaces? Last time I explained them as an essential component in the XLR microphone setup. The USB mic as I also mentioned has its audio interface built into the mic itself. If you’re fine with a USB mic, you can skip this video. However, if you want higher quality and greater versatility that comes with XLR, you’ll also need an audio interface (and an XLR cable).

What they do:

An audio interface does two main things: it powers your mic and it converts the analog signal from the mic into digital audio which is then transmitted to your computer. These features are the most important because the quality of your preamps (pre-amplifiers). The quality of your AD/DA converters (analog-digital/digital-analog) can greatly influence the end audio. Crappy preamps mean your mic may not receive enough gain (power) to get its full sound. A warm and rich mic could sound hollow or tinny–shrill. You may also hear a lot of white noise from poor-quality preamps, which makes you just want to turn whole damn thing off and cry. And then great AD/DA converters allow a great mic and great preamp to be accurately recorded on your computer quickly and without any blips due to slow conversion speeds.

Other features and examples:

There are other features to consider, such as how many mic channels it has, high pass filters to cut out any low rumble noise from your neighborhood, etc. Some even choose based on color—not even kidding! There are many audio interfaces out there with various features and prices. I started out in the very very beginning with a Behringer UMC202HD. This worked perfectly fine for me until I upgraded my mic and needed something cleaner with lower self-noise. That cost a whopping $45 on eBay. The go to for many voice actors is the Focusrite Scarlett 2i2. Focusrite also makes a single channel version called the Solo for about 40% less. These are popular because they’re affordable and offer a good clean sound. And they’re sexy red.

But there are lots of audio interfaces. Ultimately, what makes sense for you depends on your budget, the specific features you need (or don’t need), and the quality of the brand. What’s important is not to get overwhelmed. Try a cheaper option (not the cheapest!) and then go from there.

Just like with the mic discussion, audio interfaces can be overwhelming. If you need more help or would prefer to leave it to a millennial voice actor like yours truly, then email any time: joe@site3.webdnx.net

USB Mics versus XLR Mics

by

Alright, welcome back to VO Tips for the Non-VO Pro!

Last time we discussed condenser versus dynamic mics, and I thought it wise to continue the next logical topic: USB versus XLR. Aaaand what am I talking about?

What they are:

USB mics plug directly into your computer, tablet, etc. through a USB port. XLR mics require an XLR cable and something called an audio interface, which I’ll cover in a separate video. But essentially both of these do the exact same thing. They convert soundwaves into digital signals (1s and 0s) which your computer can then read and display as a 2D waveform. USB mics, however, are generally lower quality and more limited in their use.

Why USB mics are limited:

For example, last week we talked about condenser versus dynamic mics. Say I normally use a condenser mic like this but needed more external isolation and wanted to use a dynamic mic. I could simply swap them out easy-peasy. You’d have to adjust many settings on your computer if you wanted to swap out a USB mic because you swapped out the audio interface as well. Also any preamps and added signal processing tools, which I’ll discuss later, but essentially things to make the mic and therefore my voice sound much nicer, cleaner, louder—better—cannot be added to a USB mic.

Some great USB options:

There are some very powerful plugins that can do a lot to enhance mic signals, and USB mics ARE getting increasingly better in their quality. The Rode NT-USB is my personal favorite. Many voice actors unashamedly take pride in their Apogee MiC (M I C) USB mics, and then there are others like the Audio Technica 2020. The Blue Yeti is the ubiquitous mic for anyone looking to start their podcast and in general produces an OK sound. It’s likely good enough for you to start out. However, if the goal is to make better sounding audio, you’ll eventually want to upgrade to a dedicated audio interface and XLR mic.

And again, if you have a poor recording space—no sound isolation or acoustic treatment—a dynamic mic would be your best bet.

As always if this is too much to wrap your head around or you’d prefer a conversational, millennial voice talent to tackle the nuances of a good mic for you, then feel free to email me direct: joe@site3.webdnx.net

Condenser Versus Dynamic Mics

by

VO Tips on Mics: Condenser versus Dynamic

And we’re back with another VO Tips on mics: condenser versus dynamic! You’ve probably noticed I’m wearing the same shirt—because I decided to do two videos back to back. Get over it!

Anyway, I promised to make short videos and so they shall be! We’re gonna start with the topic you probably need to know about first: microphones.

The Importance of mics:

Yes, everyone starts with mics, and people will likely poopoo this beginning topic. Most amateurs fret too much about their mic and not enough on acoustics or actual performance. But I don’t care. Because you’re not actors. You don’t need to start with understanding the motivation of your character or digging into your soul to bring truth to your performance. YOU just need to record your voice quickly and effectively.

Condenser Mics:

You could write a whole book on microphones, so I’m going to focus this video simply on explaining the difference between condenser and dynamic mics in a way that the lay person understands. In short, condenser mics are high quality and meant for very detailed audio recording, like in studios. This sensitivity also means they pick up everything—so you better be in a sound-proof, acoustically treated space like this. The major exception to this generalization are super-cardioid condenser mics, like this one here which has a very tight pickup pattern. It blocks out a lot of side and rear noise, and people use them for on location recording—think of any film sets. The guy with the boom arm looking like he’s feeding ferocious actors and trying to keep a safe distance is using a shotgun mic.

Dynamic Mics:

The other type of mic is called a dynamic microphone, which is what radio stations use and what performers use on stage. These are great because they only pick up sound very nearby. This is why you have to talk more closely to them and also why you don’t hear the crowd in live performances. They’re also very rugged, meaning you can perform a wonderfully cliché mic-drop and not necessarily hurt the mic.

What Do I recommend?

So, what do you need for your audio? I’d recommend a dynamic mic if you don’t have a very soundproof or acoustically treated space. Or a super-cardioid mic like I have here—which I’ve used to record a small role in a video game in a Fiat 500 while on vacation in Italy—it was certainly not as sexy as a Fiat commercial would have been. There was a lot of sweat though since it was about 90 degrees…outside the car.

I’ll have more VO Tips on mics on the future, but if this just overwhelms you and you’d rather have a professional voice talent take care of it, feel free to email: joe@site3.webdnx.net

Voice Recording Advice for the Non-VO Professional

by

 

Are you a non-voiceover professional  who needs voice recording advice? Good! My name’s Joe Passaro, and I’m a professional voice-over artist. What does that mean, you might be asking? It means I’m an actor who uses my whole body when I act but all you get is my voice. A good voice actor can communicate what their face and body are doing through their voice. You as the listener can imagine who they are and what they’re doing simply by hearing them speak.

Now, there are a variety of voice-over artists with specific genres of voice-over they specialize in. Some do everything, some do one or two things, but most are somewhere in the middle. I for example work primarily on commercials, video games, explainer videos, brand videos, and eLearning. eLearning is a big one for me since I taught history and English for 10 years. Some things I don’t really do are IVR—interactive voice recording, essentially when you call a business and listen to dialing options on the phone. Or on-hold messaging. Things like “Did you know that getting your flu vaccinations can help reduce your chances of contracting the flu by as much as 60%” or whatever that year’s estimation is. I’ve done some of these before but for the moment it’s not what grabs me or even what I do best. I just prefer to do certain genres. Maybe that will change. Voice acting, like any craft, changes as you learn and as you grow.

Since You’re Not a Voice Actor…

But this is not why I’m doing these videos. I’m doing these videos because there are already tons of videos on how to be a voice actor or voice-over artist—same thing, by the way. Dee Bradley Baker’s iwanttobeavoiceactor.com is a great place to start for that. Instead, I’m doing these videos for those who don’t want to be a voice actor but still need to or want to record their voice and want to make it sound pretty good. And I thought in this day and age, why make a giant super long video or blog post on everything you might possibly need to record your voice well. Then overwhelm everyone with too much information. When technology allows us to make nice, compact, single-topic videos and make them very accessible?

Quick Tips for Quick Fixes

So these videos will be short—around 1-2 minutes long. They’ll be on a single topic intended for those who need to record their voice for a presentation, a podcast, their nascent anime, or even an eLearning module because you just don’t have the budget. But you still have need of voice-over. I’ll be honest, 99% of the time whatever it is you’re doing will sound much better with a pro. Almost to the point where it would be better not to have audio altogether because the voice-over is so bad it’s distracting. But that’s not what this is for. This is for those who need some quick, easy advice on making their voice recording sound as best they can. Without having to do the training, the years of experience and spend a huge amount of money on a studio space and equipment.

Homework

A professor’s trick is to always include a hook at the end of the first lesson to keep the students’ attention and interest. Usually this is a simple thought-provoking exercise connected to the overall course topic. So, I’ll leave you with this assignment until the next video: choose one or two voice-overs you hear on the radio, the TV, YouTube—whatever—and describe how you imagine what that person looks like, what they’re doing, and explain why they seem so well-suited to talk about that topic—whatever the commercial, video, or message is about.

Of course, if you’d rather hire a professional, millennial voice actor with lots of experience and training to take care of all this for you, I’d be happy to help! Just email direct: joe@site3.webdnx.net